4000 lb. Overhead Steel Boat Lift

4000 lb. Overhead Steel Boat Lift
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

$2,625.00


Product Information

 

 Boat Lift 4000lb. Kit - (must call to order)
  • 4000lb Capacity max. Gear unit, 1hp. motor TENV (Totally Enclosed Motor), 110V (220 Volt Optional), in-line GFCI (option totally sealed belt drive gear unit with cover see picture above and choose below), Lock on Switch, 14' Electrical Wire Motor to Switch(1)

  • Dual Pipe Bearing w/grease fitting (2)

  • 4” X 12’ 3” Galvanized Top I Beam w/ pulley, 4" Aluminum Sheave, Bronze Bushing, 5/8”Stainless Steel Bolt W/ Grease Fitting (2) (Please check upper cradle stock availability before purchasing.)

  • Upper I Beam Tie Down Brackets Galvanized (4)

  • 45 ft. Pieces Of 1/4 in. Cable (2) (This will give 15' from upper pulleys down to all four corners to the cradles with a 10' wide boat slip) (Call us if additional amount of cable is needed)

  • 1/4 in. Galvanized Drop Forged Cable Clamps (12)

  • Galvanized Shackles (8)

  • Chocks w/ bolts Galvanized (Optional Pontoon Chocks Lift From The Floor Of Your Boat, Keeping Stress Off The Pontoons.) (8)

  • 1/4" Thimbles (not shown in diagram) (4)

  • Galvanized Bottom Cradle Beam- 5" x 9', 5" x 9' 6", or 5" x 10' Available

(2 in. ID Schedule 40 Pipe Not Included *Purchase Locally*)

This kit works for a wide variety of boats. All hardware hot dip galvanized. Drive Pipe 2" ID Schedule 40 or 80 (not supplied). Timbers not included. Gear unit mounts to a wood beam. Due to the variety of material thickness used in boat house construction, the bolts etc. are not supplied to connect the kit hardware to the boat house. These can be purchased locally to ensure the correct sizes. PVC pipe over cables not supplied. Motors are TENV Totally Enclosed Non Vented. They are not sealed motors and must be protected from rain and weather.

 Free Upgrades Include:
  • In-line GFCI in Lieu of In-Plug GFCI

  • Galvanized Steel Flat Gear Plate. The Gears Are Manufactured in the U.S.A With the Best of Materials.

  • 1 Year Electrical Warranty

  • 6 Year Gear Plate Warranty

FREE SHIPPING ON THIS ITEM (SHIPS BY FREIGHT LINE SIGNATURE REQUIRED)


This field is required.
Top