10,000 lb. Cradle Boat Lift

10,000 lb. Cradle Boat Lift
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

$3,450.00


Product Information

 

  Boat Lift 10,000lb. Kit Includes:
  • 10,000lb Capacity Max, 2-3000 lb Gear Units 3/4 HP Marathon/Leeson TENV (Totally Enclosed Motor), 110 Volt (220 Volt Optional) and In-line GFCI, Lock on Switch, 14' Electrical Wire On Each Gear Unit (2) 

  • Gear Unit Covers (2)

  • Drive Mount Brackets (2)

  • Sealed Bearing Brackets w/Bearing (8)

  • Compound Pulley Block Hangers (4)

  • 4 in. Block Pulleys 4 in. Aluminum Sheave w/Bronze 5/8 in. Bushing on 5/8 in. Shaft. 5/8 in. Stainless Steel Bolt w/Grease Fitting – LIFETIME WARRANTY (4)

  • 26 ft. Each 5/16 in. Stainless Steel Aircraft Cable (4) (This will give about 13' from pipe to cradle depending on how high the pipe is above Water level)

  • 5/16 in. Galvanized Drop Forged Cable Clamps (12)

  • Shackles 1/2" (8)

  • Chock Bracket w/Bolts/Nuts (8) or Pontoon Chocks w/Bolts/Nuts (4)

  • Adapter Sleeves (2)

  • 5/16" Thimbles (not shown in diagram) (4)

  • Cable Stoppers 3/16" (4)

  • Cradle Beam- Wide Flange 6" x 9' or 6" 10' Length (Call first for availability) (2)
     

(1.5 in. Schedule 80 Pipe Not Included *Purchase Locally*)

This kit works for a wide variety of boats. All hardware hot dip galvanized. System capacity 10,000 lb compounded pulley. Drive Pipe 1 1/2" (not supplied) use schedule 80. Timbers not included. Due to the variety of material thickness used in boat house construction, the bolts etc. are not supplied to connect the kit hardware to the boat house. These can be purchased locally to ensure the correct sizes. Marathon Formerly GE. Motors are TENV Totally Enclosed Non Vented. They are not sealed motors and must be protected from rain and weather.

  Free Upgrades Include:
  • In-line GFCI in Lieu of In-Plug GFCI

  • Exclusive Formed Mounting Plate is Designed to Improve Strength and Totally Eliminate Deflection Problems Flat Plates Have.

  • The Gears Are Manufactured in the U.S.A With the Best of Materials

  • 2 Year Electrical Warranty

  • 6 Year Gear Plate Warranty

FREE SHIPPING ON THIS ITEM


This field is required.
Top