Product Information
| | Boat Lift 8000lb. Kit Includes: |
5000lb Gear Unit (8000 lb compounded) Capacity Max, 1 HP TENV (Totally Enclosed Motor), 220 Volt Only and In-line GFCI, Lock on Switch, 14' Electrical Wire Motor to Switch(1) Heavy Duty Dual pipe supports 18" between collars (2) Bearing Brackets with 4 bolts, nuts (4) 4" Upper Pulleys, Hanger Plates, & Shackles Aluminum Sheave w/Bronze 5/8 Bushing on 5/8 Shaft 3/8 in. thick x 2 1/2 in. x 12 in. Galvanized Hanger Plates. (4) Compound Pulley Tie Off Bracket W/Shackle (4) 4"Lower 10,000 Block Pulleys welded to I beam. Grease fitting Aluminum Sheave w/Bronze 3/4 Bushing on 3/4 Stainless Steel Shaft (4) 10' Hot Dipped Galvanized Steel I Beam With Welded Pulleys (2) Chock Brackets 16" with Bolts, Nuts (8) 5/16” Stainless Steel Cable 75' each piece (2) (This will give 15' from upper pulleys down to all four corners to the cradles with a 10' wide boat slip)(Call us if additional amount of cable is needed) 5/16 in. Galvanized Drop Forged Cable Clamps (12) 5/16” Thimbles (4)
(2 in. ID Schedule 80 Pipe Not Included *Purchase Locally*) |
This kit works for a wide variety of boats. All hardware hot dip galvanized. Drive Pipe 2" ID Schedule 80 (not supplied). Timbers not included. Due to the variety of material thickness used in boat house construction, the bolts etc. are not supplied to connect the kit hardware to the boat house. These can be purchased locally to ensure the correct sizes.
Optional Remote Control - ORDER A TEC 1 REMOTE CONTROL WITH YOUR KIT FOR A SPECIAL PRICE! Comes with hand held remote and pre-wired ready to plug in. Remote operates as a momentary switch, must hold pressure on the up or down button to run the motor. Just click the drop down to add to the kit when ordering.
Motors are TENV Totally Enclosed Non Vented. They are not sealed motors and must be protected from rain and weather. Option for all Aluminum Motors.
1 Year Electrical Warranty
FREE SHIPPING ON THIS ITEM (SHIPS BY FREIGHT LINE SIGNATURE REQUIRED)
****CRADLE IS 10’ AND BOAT SLIP NEEDS TO BE AT LEAST 11’ WIDE. THIS WILL FIT A BOAT UP TO 9’ WIDE.****
